เครื่องแยกโลหะและระบบแม่เหล็กของ Sesotec ปกป้องเอ็กทรูเดอร์จากความเสียหายที่อาจเกิดจากอนุภาคโลหะในเม็ดพลาสติกหรือแม้อาจจะติดไปกับผลิตภัณฑ์ อุปกรณ์ร้ายแรงและการหยุดการทำงานระหว่างการผลิตนั้นอาจเกิดจากการอุดตันของตัวกรองละลายและหัวฉีดจะทำงานลดลง.



A magnetic separator for high material throughputs, and larger column diameters (40 - 120 mm) and particle sizes (8 - 10 mm), the EXTRACTOR-SE is installed at the feedstock intake of the extruder and is used to remove ferrous materials prior to processing.
แสดงเพิ่ม

GF
These metal separators are designed to be installed in horizontal, vertical or inclined vacuum and pressure pipes. Detection and removal of contaminants is effective even at high speeds and rejected material is removed into a container with no interruption to material flow.
แสดงเพิ่ม

GMT
An economical permanent magnet system installed at the feedstock intake of the extruder, the GMT eliminates larger particles of ferrous metals to produce a higher quality product and reduce expensive repairs.
แสดงเพิ่ม

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
แสดงเพิ่ม

Metal separator for freefall applications that is installed at the discharge of the cyclone or bag filling tube, for applications requiring higher scanning sensitivity.
แสดงเพิ่ม

RAPID COMPACT metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from free-falling bulk materials. Metal contaminants (even those contained in granulate) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow. The RAPID COMPACT range is mainly used in industries where hygiene standards are less important. They are used to inspect dry bulk materials with little or no product effect.
แสดงเพิ่ม

Metal separator used to inspect slowly moving bulk material such as foil flakes as well as large streams.
แสดงเพิ่ม

The RAPID PRO-SENSE metal separator primarily is used for quality inspection (product purity) in the production and compounding of plastic granulate, where it typically is installed directly before the material is filled in bigbags, octabins, or silos. The metal separator also is used for quality inspection in the incoming goods department of plastic-processing plants (product purity, machine protection).

 

 

แสดงเพิ่ม

A metal separator with product effect compensation, the RAPID VARIO-FS is installed at the feedstock intake of the extruder. Because the detection and separation units are separate, the system can be adapted to many different configurations and conditions.
แสดงเพิ่ม

The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up to 100°C in standing or slow-moving material columns.
แสดงเพิ่ม

ติดต่อ

Sesotec Pte. Ltd

25 International Business Park

#01-61/64 German Centre

Singapore 609916

 

โทรศัพท์ : +65 6562 8876
โทรสาร: +65 6562 8877

enquiry@sesotec.com.sg
www.sesotec.com.sg

วารสารข่าวจาก Sesotec