เครื่องแยกโลหะและระบบแม่เหล็กของ Sesotec ปกป้องเครื่องเป่าขึ้นรูปจากความเสียหายที่อาจเกิดจากอนุภาคโลหะในเม็ดพลาสติกหรือแม้อาจจะติดไปกับผลิตภัณฑ์ อุปกรณ์ร้ายแรงและการหยุดการทำงานระหว่างการผลิตนั้นอาจเกิดจากการอุดตันของตัวกรองละลายและหัวฉีดจะทำงานลดลง.



A magnetic separator for higher material throughputs and larger column diameters (40 - 120 mm) and particle sizes (8 - 10 mm), the EXTRACTOR-SE is installed at the feedstock intake of blow molding machines, and is used to separate out ferrous metals from heavily contaminated feedstock.
แสดงเพิ่ม

GF
These metal separators are designed to be installed in horizontal, vertical or inclined vacuum and pressure pipes. Detection and removal of contaminants is effective even at high speeds and rejected material is removed into a container with no interruption to material flow.
แสดงเพิ่ม

GMT
An economical permanent magnet system installed at the feedstock intake of the blow molding machine, the GMT eliminates larger particles of ferrous metals to produce a higher quality product and reduce expensive repairs.
แสดงเพิ่ม

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
แสดงเพิ่ม

Metal separator for lower material throughputs. The PROTECTOR is installed directly above the material infeed of the blow molding machine, and reliably separates out impurities beginning from a size of 0,3mm in the feedstock, both during initial filling and refilling.
แสดงเพิ่ม

The special design of the PROTECTOR PROFESSIONAL guarantees highest scanning sensitivity for smallest metal particles even under high mechanical loads, which may result from high superstructural assemblies, for example when various conveying, dosing, mixing, or feeding units are used simultaneously. The design with integrated reinforcing frame ensures that the high-performance detection unit is in no way affected by vertical mechanical forces.
แสดงเพิ่ม

Metal separator for larger material throughputs. The MFE is installed directly above the material infeed of injection molding machines. The pneumatically-driven reject system guarantees effective and reliable separation even for large grain size.
แสดงเพิ่ม

A robust magnet system in a low-profile (60 mm) configuration that is especially suited to restricted areas. The SAFEMAG is installed just above the feedstock intake of the blow-molding machine. Its unique design prevents plastic material from being deposited on the device.
แสดงเพิ่ม

ติดต่อ

Sesotec Pte. Ltd

25 International Business Park

#01-61/64 German Centre

Singapore 609916

 

โทรศัพท์ : +65 6562 8876
โทรสาร: +65 6562 8877

enquiry@sesotec.com.sg
www.sesotec.com.sg

วารสารข่าวจาก Sesotec