Sesotec metal detectors and magnet systems prevent damage to size reduction machinery. They are integrated into conveyor belts for inspection of bulk materials and piece goods.



DLS tunnel metal detectors are separable and can be easily installed on either new or existing conveyors. They are particularly suitable for inspecting tall materials as detection accuracy remains consistent across the entire aperture. A typical application is the protection of cutting mills and shredders.
Show more

Single-face metal detector that can be installed in small conveyor systems, e.g. with aluminium profile construction, for applications where the height of the product stream will not exceed 100 mm.
Show more

ELS
Single face ELS metal detectors are installed directly underneath the belt of a conveyor where the depth of conveyed material is shallow ie close to the belt. A typical application is the inspection of sprues to protect auger granulators. ELS can also be used to inspect the quality of plastic components to ensure the core is not broken.
Show more

Magnetic separator for Jacob pipelines; Inspects granulates of up to 10 mm.
Show more

GLS
Enclosed-aperture tunnel metal detector, installed in bonded-type conveyor belt systems for applications requiring higher scanning sensitivity.
Show more

GMT
Permanent-magnetic grid magnets of type GMT & GML predominantly are used in the plastics industry for the separation of coarse ferrous contaminants. Ferrous particles are filtered out of the bulk material while the rest of the material passes the magnet grid. It is recommended to regularly check the magnet to make sure that contaminants are not knocked off. The low purchase costs provide excellent benefit that often results in a considerably improved product quality and in a reduction of expensive repairs.
Show more

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
Show more

Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.
Show more

RAPID COMPACT metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from free-falling bulk materials. Metal contaminants (even those contained in granulate) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow. The RAPID COMPACT range is mainly used in industries where hygiene standards are less important. They are used to inspect dry bulk materials with little or no product effect.
Show more

Metal separator used to inspect slowly moving bulk material such as foil flakes as well as large streams.
Show more

The RAPID VARIO-FS is a metal separator with product effect compensation that is installed at the cyclone outlet for freefall applications. Separate detection and separation units make it readily adaptable to many different configurations and conditions.
Show more